This tournament box carries all the game components you may need for a game of StarCraft TMG, except for a measuring tape. It stores all the tokens for one faction, one set of dice, and has an open area big enough for unit cards, where you also put other sized cards. When the box is closed, nothing moves around, except maybe for a few cards in the card area. There are pre-drilled magnet holes for 4 5x2mm magnets to help hold the case closed even tighter, but they are not required (you can see in my photos I did not install them myself). There are three faction specific boxes. If you remove painting from any box in the 3mf, you can print one without any logo on it too. There are two dice trays, one for 12 mm trays, and one for 16mm trays. The 12mm dice tray fits the dice that came in the starter sets. The 16mm dice tray fits 20 16mm dice, like the ones that Baron of Dice sells. I know they sell in sets of 25, but there is just not enough room for 25 16mm dice in this box. Also, unlike all other components of this box, this tray requires supports. Disclaimer: I do not own Baron of Dice dice, so I had to rely on them being the advertised 16mm, and not larger. If you print this tray, you are a beta tester. The tray may not fit the dice well. Please report back with findings, success or failure, in the comments, and I will make adjustments as needed. I put in a picture of the printed tray with other 16mm dice I do own (the grey dice tray in the yellow box). Other StarCraft TMG Designs Lost Temple Terrain Organizer Box for Lost Temple Terrain Organizer Box for Tokens, Dice and Cards Specialist Weapons Box Boost Me If you want my future StarCraft TMG designs to remain completely free, please support this model with a boost. Boosts are incredibly important to designers, so when you have them, give them generously to the designers whom you think deserve them. or consider putting a few bucks in my tip jar . Boosts and tips are never expected, but always appreciated.

StarCraft TMG Tournament Box

by MrDulkes · original on MakerWorld ↗

♥ 84⬇ 220🖨 253 prints

Print profiles

• StarCraft TMG Tournament Box

  ⏱ 9h 44m · 368 g · 6 material(s) · needs AMS

  Prints on: P1S 0.4, X1 Carbon 0.4, X1E 0.4, H2D Pro 0.4, H2S 0.4, H2D 0.4, P2S 0.4, H2C 0.4, A2L 0.4, A1 0.4, X1 0.4, P1P 0.4, X2D 0.4PLAPLAPLAPLAPLAPLA

  Not printable on our printers