If you love dogs, you’re going to love this little pug! 🐶❤️ Just chilling in the bed and waiting for a satisfying click. ✨ This model is printed in two main parts and requires a Cherry MX style mechanical keyboard switch (see details below). - Bed (Base) The bed is available in two versions — pick your favorite! • With hole: includes a small hole for attaching a keychain chain. • Without hole: the standard version. Choose any color you like for the bed and give your pug its own look! 🐶 - Pug (Top) The pug is the movable part of the clicker, designed in a cute lying-down position. It attaches to the mechanical switch using the cross shaped stem and fits neatly into the bed. ⚠️ Print profile note - don’t delete the yellow cube! On the pug, the slicer might interpret some of the small color details as overhangs. I added a modifier (the yellow cube you’ll see in the photo) to prevent printing issues . Just make sure not to delete the cube! Both parts are multicolor (AMS required). ⚠️You will need a Cherry MX style mechanical keyboard switch. I used a square edged switch like in the photo, but I also tested with a smooth edged one and it worked fine. Make sure to check your switch model before printing and assembling! ⌨️ ✨ For those who aren’t sure which switch to get: I use a Cherry MX–style mechanical keyboard switch. It has a small cross-shaped stem on top where my models attach. You can find these switches in mechanical keyboard stores, electronics shops, or DIY keyboard sites. I can’t include a link here, but I’ve added a photo for reference. Assembly: Print the two parts (bed + pug). Insert the cross-shaped stem of the switch into the small cross-shaped slot on the underside of the pug. Place the pug + switch assembly into the bed. Tip: Add a small amount of glue here to make the connection extra secure. 🌸 License Notice Personal use only. A Commercial License is required for any commercial use, including selling physical products, giveaways, freebies, subscriber rewards, or promotional use. Interested in selling your prints of this model? Purchase a Commercial License through the link: https://bluveriestudio.gumroad.com/

Pug Fidget Clicker

by Bluverie Studio · original on MakerWorld ↗

♥ 347⬇ 89🖨 57 prints

License: Standard Digital File Licensefidgetclickerpugdog loversdoganimalfidget clickercutegiftcute pug

Print profiles

0.16mm layer, 2 walls, 10% infill
⏱ 6h 34m · 97 g · 5 material(s) · needs AMS
Prints on: X2D 0.4, X1 0.4, A1 0.4, X1E 0.4, P2S 0.4, A1 mini 0.4, H2D 0.4, A2L 0.4, P1S 0.4, H2C 0.4, X1 Carbon 0.4, H2D Pro 0.4, H2S 0.4, P1P 0.4PLAPLAPLAPLAPLA
Not in stock