Add a warm, organic aesthetic to any room with this beautifully crafted 3D printable flower lamp,. Featuring delicately veined, translucent tulip petals and a gracefully curved leaf stem, this functional art piece doubles as a stunning desk lamp or ambient nightlight. Key Features Perfect Hardware Fit: Custom-modeled to perfectly support a full threaded E14 lamp holder and standard E14 LED bulbs . Stunning Light Diffusion: The detailed veins on the flower shade are designed to catch and diffuse light beautifully when printed in translucent or white filaments. Clean Cable Management: Features a built-in wire routing channel at the base, ensuring your lamp sits perfectly flat on any desk or nightstand while hiding unsightly cords. Support-Free Optimization: Engineered to minimize the need for complex supports during the printing process. E14 Holder Link: https://a.co/d/06g3easW Printing Recommendations Lampshade: Print in Translucent or White PETG/PLA. Use 100% infill or sufficient wall loops to ensure structural integrity while maximizing that warm, glowing light transmission. Stem & Base: Print in Green, Red, or Wood-filled PLA/PETG for a natural look. Higher infill (15-20%) is recommended for the base to provide weight and stability. Safety Note: Always use an LED E14 bulb to prevent the lampshade from warping or melting due to heat.

Tulip Flower Lamp

by Naqash ⭐⭐⭐⭐⭐ · original on MakerWorld ↗

♥ 139⬇ 38🖨 19 prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 22h 25m · 580 g · 1 material(s)

  Prints on: A1 0.4, H2D Pro 0.4, X1 0.4, X2D 0.4, P1S 0.4, P1P 0.4, A2L 0.4, P2S 0.4, H2C 0.4, X1 Carbon 0.4, X1E 0.4, H2D 0.4, H2S 0.4PLA

  Not printable on our printers