Custom Spacer / Standoff Generator Print the exact spacer height, hole, body, and end feature your assembly needs Generate round, hex, or square standoffs in practical sets with flanges, counterbores, or nut traps. Problem and measuring Stock spacers come in fixed heights and hole sizes. Measure face-to-face separation, fastener shaft, required outer clearance, screw head or nut, and quantity. Customizer parameters Height/body/hole and fit; plain, flanged, counterbored, or nut-trap end; quantity and spacing. Print and assembly Print upright with 4 walls; no supports. PETG recommended for mechanical use. Deburr holes, compensate elephant foot if faces must sit flush, and tighten only enough to seat the assembly.

Custom Spacer / Standoff Generator

by nassworks · original on MakerWorld ↗

♥ 1.9k⬇ 815🖨 448 prints

License: Standard Digital File Licensestandoffspacerpcb spacerhex standoffcounterbore spacernut trap

Print profiles

Default Tester Model 0.28mm layer, 2 walls, 15% infill
⏱ 13m · 3 g · 1 material(s)
Prints on: A1 mini 0.4, H2D 0.4, H2S 0.4, X2D 0.4, A2L 0.4, H2C 0.4, X1E 0.4, P1P 0.4, P2S 0.4, P1S 0.4, H2D Pro 0.4, X1 Carbon 0.4, X1 0.4, A1 0.4PLA
Not in stock