This gyro fidget toy is made of concentric rings, each one nested inside the next around a shared center point, with every ring able to rotate a full 360 degrees on any axis, completely independently of the others. Spin one ring and it rotates freely on its own, or roll them all with your fingers and feel the satisfying motion . Getting the rotation perfectly smooth with every piece took many prototypes , especially because this toy is entirely print-in-place . This means the whole assembly comes straight off the build plate ready to spin, with zero assembly and zero supports required. It’s available in four outer textures — a striped pattern, a diamond pattern, a knurled grip, and a smooth finish — giving you options so you can choose the look and feel that suits your style . The Ultimate 360° Gyro Fidget Toy is the perfect print for anyone who loves a good fidget , with four textures to suit every maker . Boost Me If you like this model, please consider boosting it! It helps out a ton :) Membership Want to sell my 3D printed fidget toys? Become part of my Commercial License Membership program! Printing Instructions: Prepare the Print Bed Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion. Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick. Download the Print Profile Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio. Select Your Printing Options Choose your filament type and color. Select your print bed type (e.g., textured or smooth). Confirm your printer settings, ideally for a Bambu Lab printer. Start Printing Begin the print job. No supports are necessary.

Ultimate 360° Gyro Fidget Toy (Print in Place)

by AbyssalCactus · original on MakerWorld ↗

♥ 453⬇ 1.5k🖨 2.0k prints

Print profiles

• Diamond

  ⏱ 24m · 10 g · 1 material(s)

  Prints on: P2S 0.4, X1 0.4, A2L 0.4, P1P 0.4, X1 Carbon 0.4, H2S 0.4, H2D Pro 0.4, H2D 0.4, H2C 0.4, X2D 0.4, A1 mini 0.4, A1 0.4, P1S 0.4, X1E 0.4PLA

  Not in stock

• Knurled

  ⏱ 27m · 10 g · 1 material(s)

  Prints on: P2S 0.4, H2C 0.4, P1S 0.4, A1 mini 0.4, A2L 0.4, H2S 0.4, X1 Carbon 0.4, P1P 0.4, H2D 0.4, X1 0.4, X2D 0.4, X1E 0.4, H2D Pro 0.4, A1 0.4PLA

  Not in stock

• Smooth

  ⏱ 23m · 10 g · 1 material(s)

  Prints on: P2S 0.4, A1 0.4, H2S 0.4, H2C 0.4, X2D 0.4, P1P 0.4, P1S 0.4, X1E 0.4, X1 0.4, A1 mini 0.4, A2L 0.4, H2D Pro 0.4, H2D 0.4, X1 Carbon 0.4PLA

  Not in stock

• Striped

  ⏱ 25m · 10 g · 1 material(s)

  Prints on: P2S 0.4, H2C 0.4, P1S 0.4, A1 mini 0.4, A2L 0.4, H2S 0.4, X1 Carbon 0.4, P1P 0.4, H2D 0.4, X1 0.4, X2D 0.4, X1E 0.4, H2D Pro 0.4, A1 0.4PLA

  Not in stock

• All Patterns

  ⏱ 1h 19m · 39 g · 1 material(s)

  Prints on: P2S 0.4, A2L 0.4, P1P 0.4, H2S 0.4, A1 0.4, X1E 0.4, H2D Pro 0.4, X1 0.4, X2D 0.4, H2D 0.4, A1 mini 0.4, H2C 0.4, P1S 0.4, X1 Carbon 0.4PLA

  Not in stock

• PLA Optimized - Faster Printing - Higher Quality Overhangs

  ⏱ 1h 38m · 39 g · 1 material(s)

  Prints on: A1 mini 0.4, H2D Pro 0.4, H2S 0.4, P1S 0.4, X1 0.4, H2D 0.4, P1P 0.4, X2D 0.4, X1 Carbon 0.4, A2L 0.4, H2C 0.4, A1 0.4, P2S 0.4, X1E 0.4PLA

  Not in stock

• PETG profile

  ⏱ 58m · 10 g · 1 material(s)

  Prints on: A1 0.4, H2D Pro 0.4, P1S 0.4, H2S 0.4, H2D 0.4, A1 mini 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, X2D 0.4, P1P 0.4, X1 0.4, X1E 0.4, A2L 0.4PETG

  Not in stock

• dual color_0.2mm layer, 2 walls, 15% infill

  ⏱ 29m · 12 g · 2 material(s) · needs AMS

  Prints on: P1S 0.4, H2D 0.4, A1 mini 0.4, A2L 0.4, H2D Pro 0.4, X1E 0.4, A1 0.4, X1 Carbon 0.4, H2C 0.4, X2D 0.4, H2S 0.4, X1 0.4, P1P 0.4, P2S 0.4PLAPLA

  Not in stock