This tread clicker fidget takes the satisfying roll of a tank track and adds a built-in click to every rotation. One of the two hubs is fitted with a flexible spring that rides along the grooves cut into the wheel, bending out of place as the tread rolls and snapping into the next groove for a crisp click with every cycle. The spring tension and groove spacing were carefully tuned through several rounds of prototyping to get a click that's consistent without adding too much resistance to the roll. Since it's entirely print-in-place , it comes off the build plate fully assembled and ready to roll, no supports or post-processing needed. The tank-tread-inspired links and recessed hub caps give it a rugged, mechanical look while providing plenty of grip and texture to keep your fingers engaged as you cycle the tread around, and the added spring assembly gives the roll a touch more resistance than my original tread roller. The Ultimate Tread Clicker Fidget is the perfect print for any mechanism-loving maker who wants a little extra feedback in every spin. Boost Me If you like this model, please consider boosting it! It helps out a ton :) Membership Want to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!x Printing Instructions: Prepare the Print Bed Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion. Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick. Download the Print Profile Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio. Select Your Printing Options Choose your filament type and color. Select your print bed type (e.g., textured or smooth). Confirm your printer settings, ideally for a Bambu Lab printer. Start Printing Begin the print job. No supports are necessary.

Ultimate Tread Clicker Fidget (Print in Place)

by AbyssalCactus · original on MakerWorld ↗

♥ 684⬇ 1.6k🖨 2.0k prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 2h 6m · 36 g · 1 material(s)

  Prints on: A1 mini 0.4, P2S 0.4, H2C 0.4, P1S 0.4, H2D Pro 0.4, A2L 0.4, X1E 0.4, P1P 0.4, H2D 0.4, H2S 0.4, X2D 0.4, X1 0.4, A1 0.4, X1 Carbon 0.4PLA

  Not in stock

• PLA Optimized - Faster Printing - Higher Quality Overhangs

  ⏱ 1h 58m · 34 g · 1 material(s)

  Prints on: A1 mini 0.4, X1E 0.4, X1 0.4, H2D Pro 0.4, P2S 0.4, P1P 0.4, X1 Carbon 0.4, A1 0.4, H2D 0.4, P1S 0.4, H2C 0.4, X2D 0.4, A2L 0.4, H2S 0.4PLA

  Not in stock

• 2 Colors

  ⏱ 2h 19m · 37 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, X1 Carbon 0.4, A1 mini 0.4, P2S 0.4, A2L 0.4, H2D 0.4, X1 0.4, P1S 0.4, H2C 0.4, H2D Pro 0.4, P1P 0.4, H2S 0.4, X2D 0.4, X1E 0.4PLAPLA

  Not in stock

• PLA optimized for SPEED, but still keeping quality&function

  ⏱ 1h 17m · 34 g · 1 material(s)

  Prints on: P1S 0.4, X1E 0.4, X1 0.4, H2D Pro 0.4, P2S 0.4, P1P 0.4, A1 0.4, X1 Carbon 0.4, A1 mini 0.4, H2D 0.4, H2C 0.4, X2D 0.4, A2L 0.4, H2S 0.4PLA

  Not in stock

• 参数优化，提高效率，适配A1和P系列

  ⏱ 1h 52m · 36 g · 1 material(s)

  Prints on: A1 0.4, H2D Pro 0.4, X2D 0.4, H2S 0.4, A1 mini 0.4, A2L 0.4, P1P 0.4, P2S 0.4, H2C 0.4, X1 Carbon 0.4, X1E 0.4, P1S 0.4, H2D 0.4, X1 0.4PLA

  Not in stock