2026-07-10 Updated print profile The nose area has been modified, and the mask is now smoother to match the classic Spider-Man design Support painted specific areas to improve print reliability 2026-08-05 Updated the print profile Added optional plates for more reliable printing. If you’ve had bed adhesion issues, try these instead: Plate 7 The webs have been cut into two parts. You may need to glue the thread connectors as they are a little loose. Plate 8 Biceps (blue parts of the arms) are oriented horizontally for better bed adhesion. Spider-Man - The Web Slinger Dynamic and powerful web-slinging Spider-Man captured in an iconic action pose, shooting thick, detailed web beams from both hands that impact the ground with impressive splashes. This fully multipart model features easy snap-fit assembly with no glue required . Part of my Legends Unleashed series, this model brings the classic web-slinger to life with high-detail sculpting optimized for Bambu Studio. The thick web beams and ground impact splashes add real visual drama and make it stand out on any shelf or display. Print profile 100% scale = 189 mm × 150 mm × 232 mm Layer Height : 0.16-0.2 mm Walls : 2–3 Infill : 5–30% (uses lower end for large parts to save filament/time; higher end for small/functional parts and connectors to boost durability and prevent breakage during repeated assembly/disassembly) Speed: Small parts operate at a slower speed than other parts. Supports : Tree supports are automatically generated Color Handling : Multipart design → no AMS required. Print plates separately in desired filaments. You can also rearrange the parts onto different plates if you want to mix the colors in a more unique way. Options : Print plates 1–6 or swap out certain parts with available alternatives. The webs can be printed in two sections, and the biceps printed horizontally for a more reliable result. Plates Assembly instruction This multipart model is designed for effortless, glueless assembly! Snap everything together using the peg connectors. No glue required for a secure, satisfying fit. Preparation Carefully remove tree supports before assembly. Tree supports release most cleanly when cut between branches… snap them away without stressing surfaces. Peg Connections Almost all parts use the same snap-fit peg system Pegs are intentionally tight for rock-solid hold → align and then push firmly until you feel/hear the snap. If too tight → lightly trim peg domes (green) with a knife. If slightly loose → a tiny drop of superglue fixes it instantly. Smaller pegs may feel less "clicky" than larger ones but still provide reliable strength. Orientation Note: Left (L) and Right (R) are labeled based on the character’s own perspective, not the viewer’s. For example, the character’s right eye is marked as R, even if it appears on the left side when viewed from the front. Spider Noir - The Perched Phantom | no AMS Batman Noir - The Perched Sentinel | no AMS - Free 3D Print Model - MakerWorld

Spider-Man - The Web Slinger | Multipart | no AMS

by AlphaSculpt · original on MakerWorld ↗

♥ 1.3k⬇ 1.1k🖨 726 prints

Print profiles

• 0.16-0.2mm layer, 2-3 walls, 5-30% infill

  ⏱ 23h 58m · 307 g · 4 material(s)

  Prints on: A1 0.4, H2S 0.4, X2D 0.4, A1 mini 0.4, P2S 0.4, H2D 0.4, A2L 0.4, X1 Carbon 0.4, X1E 0.4, X1 0.4, P1S 0.4, H2D Pro 0.4, H2C 0.4, P1P 0.4PLAPLAPLAPLA

  Not in stock