Boost Me With no power, comes no responsibility... THIS MODEL IS JUST THE GOGGLES AND LENSES. The mask is made from an old black beanie, the straps are electrical tape, and an old fedora I used in a Halloween costume when I was younger. The face shell that I used was from Budwin3D and it is his Miles Morales bodega face shell but I'm sure that any of his Spider-Man face shells would work perfectly. This is from the popular Spider-Verse Movies and the new Spider-Man Noir show that is streaming on Amazon prime. Also, Go check out Spectraforge Designs for more amazing models. "Wherever I go, the wind follows. And the wind... smells like rain." - Benjamin Reilly (Spider-Man Noir) Enjoy : )

Spider-Man Noir Mask Goggles (No A.M.S. Required)

by The Antagonist · original on MakerWorld ↗

♥ 745⬇ 428🖨 255 prints

Print profiles

• Print by Object | Supports Enabled |0.2mm, 2wall, 15% infill

  ⏱ 1h 5m · 22 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, A2L 0.4PLAPLA

  Not printable on our printers

• Plates by color| Supports Enabled |0.2mm, 2 wall, 15% infill

  ⏱ 1h 8m · 22 g · 2 material(s)

  Prints on: A1 0.4, H2D Pro 0.4, X1 Carbon 0.4, H2C 0.4, X1E 0.4, P2S 0.4, P1P 0.4, A2L 0.4, H2S 0.4, H2D 0.4, X2D 0.4, A1 mini 0.4, P1S 0.4, X1 0.4PLAPLA

  Not in stock

• AMS Goggles

  ⏱ 4h 55m · 41 g · 3 material(s) · needs AMS

  Prints on: X2D 0.4, H2D Pro 0.4, X1 Carbon 0.4, H2C 0.4, X1E 0.4, P2S 0.4, P1P 0.4, A2L 0.4, A1 0.4, H2S 0.4, H2D 0.4, A1 mini 0.4, P1S 0.4, X1 0.4PLAPLAPLA

  Not in stock

• 0.08mm layer, 3 walls, 15% infill

  ⏱ 3h 42m · 32 g · 1 material(s)

  Prints on: X2D 0.4, H2S 0.4, P1S 0.4, A1 mini 0.4, H2D 0.4, H2D Pro 0.4, P1P 0.4, X1E 0.4, A1 0.4, X1 0.4, X1 Carbon 0.4, H2C 0.4, A2L 0.4, P2S 0.4PLA

  Not in stock

• NO AMS See through Lens

  ⏱ 1h 6m · 20 g · 2 material(s)

  Prints on: P1S 0.4, X2D 0.4, H2D Pro 0.4, H2D 0.4, X1 0.4, A1 0.4, H2S 0.4, H2C 0.4, X1E 0.4, A1 mini 0.4, A2L 0.4, P2S 0.4, X1 Carbon 0.4, P1P 0.4PLAPLA

  Not in stock