Highly detailed Spider-Noir-inspired figure from the Marvel Spider-Verse in a seated pose – perfect as a display piece for your shelf or desk. Designed to naturally sit on edges, ledges, or shelves, this model captures the dark detective-style look and mysterious atmosphere of the iconic Spider-Noir character while blending seamlessly into any setup. This model comes in two versions: AMS / multicolor version Single color version Recommended settings: Layer height: 0.16 mm Supports: Minimal / tree supports recommended PLA friendly ⚠️ Carefully remove supports around delicate areas like the hat and coat. Note: Every model is personally test printed before upload, and all photos show real printed figures — not AI-generated renders. Boost Me If you like it, consider boosting 🚀

Spider-Noir Sitting on Ledge Figure | Spiderman

by shredderrich · original on MakerWorld ↗

♥ 2.8k⬇ 5.7k🖨 3.5k prints

Print profiles

• AMS Version! 0.16mm layer, 2 walls, 15% infill

  ⏱ 3h 24m · 42 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, A1 mini 0.4, X1E 0.4, P1S 0.4, X1 0.4, X2D 0.4, H2D 0.4, X1 Carbon 0.4, P2S 0.4, H2S 0.4, H2D Pro 0.4, H2C 0.4, P1P 0.4, A2L 0.4PLAPLA

  Not in stock

• 0.16mm layer, 2 walls, 15% infill

  ⏱ 22h 13m · 318 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, A2L 0.4, P2S 0.4, H2D 0.4, H2S 0.4, H2D Pro 0.4, X2D 0.4, H2C 0.4PLAPLA

  Not printable on our printers

• Soportes Fácil de Quitar

  ⏱ 3h 41m · 43 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, H2C 0.4, X2D 0.4, A1 mini 0.4, H2D Pro 0.4, X1 0.4, P2S 0.4, P1S 0.4, X1E 0.4, H2S 0.4, X1 Carbon 0.4, P1P 0.4, A2L 0.4, H2D 0.4PLAPLA

  Not in stock

• Version Cortada para imprimir por partes

  ⏱ 20h 26m · 247 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, P1P 0.4, X1E 0.4, P1S 0.4, P2S 0.4, X2D 0.4, X1 0.4, A1 mini 0.4, A2L 0.4, X1 Carbon 0.4, H2C 0.4, H2D Pro 0.4, H2S 0.4, H2D 0.4PLAPLA

  Not in stock