About Models: These models are designed to represent real animals as naturally as possible, with focus on accurate size, shapes, proportions, colors, fine details, and natural movement or pose. Some models include articulated, hinge, or flexi parts for motion and flexibility, while others are non-articulated and focus on realistic appearance. Some parts, such as legs, can be carefully adjusted with gentle heat for a more natural pose, but too much heat can damage or deform the model. Print: All settings are pre-configured and optimized for a balance between detail, print time, strength, functionality, and easy support removal. I recommend printing the models at their original scale. Scaling down may cause issues such as fused moving parts, small hinges not working correctly, or fine details not printing properly. Difficulty Guide: The difficulty icon is a general overall guide and may vary depending on your printer, filament, slicer settings, calibration, and experience. It mainly reflects print complexity, filament changes, possible waste, fine details, support use, and support removal. Multicolor prints may create more waste on single-nozzle AMS or AMS Lite systems, such as A1 with AMS Lite, compared to dual-nozzle or lower-waste systems like X2D or H2C. Level 3 / Supports: For higher difficulty models, especially Level 3, I recommend using Support Material for PLA. It can make support removal much easier, cleaner, and safer for delicate parts. This is especially helpful when the model has many supports, thin details, legs, antennas, or other fragile areas. Note / Handling: Some models may have very small hinge parts or delicate thin areas, such as legs, antennas, tails, or other small details. On some models, these parts may disconnect or break more easily if handled roughly. Please handle the models with care. They are not intended for aggressive play, but rather as educational models, display pieces, or gentle collectible toys. Durability may vary from model to model. Some models are stronger and may be suitable for careful play, while others are more delicate and better suited for display on a shelf. Articulated / Hinge Versions: For models with moving parts, hinges, or flexi sections, please open the included 3MF file, ideally in Bambu Studio. Exporting to another slicer may cause hinge problems. My hinges are created and tested by me, usually designed to print without supports, and are added this way so they can be moved, adjusted, customized, or removed when scaling the model down. STL / 3MF Note: STL files are usually provided without moving parts. The prepared articulated or hinge version is inside the 3MF file. This helps avoid problems with small scaled-down models, where moving parts, gaps, or hinges may fuse or fail. If needed, you can remove the hinges and print the model as a solid version. Safety Notice: Some models may have sharp edges or small parts. Avoid printing them too small and do not leave children unattended with them, as there is a choking risk. If you adjust parts with heat, always proceed carefully and use heat gently. Support / Links: I truly appreciate every comment, rating, or photo of your print it really motivates me to keep creating. Below, you can find links to my collections, Patreon, YouTube, and other useful pages. On Patreon and MakerWorld Membership, you can also find commercial licenses. Don’t forget to check out my other models and collections here: PS: Thank you

House Invaders - Whip Spider

by 3Dteapack · original on MakerWorld ↗

♥ 2.8k⬇ 5.1k🖨 4.6k prints

Print profiles

• 0.16mm layer, 2 walls, 15% infill

  ⏱ 2h 38m · 28 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, P2S 0.4, H2D Pro 0.4, X1E 0.4, A2L 0.4, X1 0.4, X1 Carbon 0.4, P1P 0.4, H2D 0.4, P1S 0.4, H2S 0.4, H2C 0.4, X2D 0.4PLAPLA

  Not printable on our printers

• For A1 Mini - 0.16mm layer, 2 walls, 15% infill

  ⏱ 1h 57m · 18 g · 2 material(s) · needs AMS

  Prints on: A1 mini 0.4, A2L 0.4PLAPLA

  Not in stock

• Single Color - 0.16mm layer, 2 walls, 15% infill

  ⏱ 52m · 10 g · 1 material(s)

  Prints on: A1 0.4, X1E 0.4, H2C 0.4, H2D 0.4, P1P 0.4, H2S 0.4, P2S 0.4, P1S 0.4, A2L 0.4, H2D Pro 0.4, X1 0.4, X1 Carbon 0.4, X2D 0.4PLA

  Not printable on our printers

• 加固模型，提升强度

  ⏱ 29m · 4 g · 1 material(s)

  Prints on: A1 0.4, A1 mini 0.4, P1P 0.4, P2S 0.4, H2C 0.4, X1 Carbon 0.4, H2D Pro 0.4, X2D 0.4, X1 0.4, A2L 0.4, X1E 0.4, H2S 0.4, H2D 0.4, P1S 0.4PLA

  Not in stock