Superior Spider-Man Textured Helmet Uses 8x2mm and 4x2mm Magnets, - Be sure to use the magnets in the BOM as they were tested and work properly. Magnets in total for the build - 8x2mm = 20 in total - 4x2mm = 24 in total Use Super Glue "I use the gel kind" when inserting the Magnets, and Eye Lens. Enjoy

Superior Spider-Man Textured Helmet

by Budwin · original on MakerWorld ↗

♥ 977⬇ 1.0k🖨 260 prints

License: Standard Digital File LicenseSpidermanmarvelmaskpropscosplaybudwinpeterparkerdoctor octopus

Print profiles

Superior-Spider-Man-Sliced-H2S
⏱ 84h 41m · 1620 g · 2 material(s) · needs AMS
Prints on: H2S 0.4, H2C 0.4, A2L 0.4, H2D 0.4, H2D Pro 0.4PLAPLA
Not printable on our printers
Superior-Spider-Man-Sliced-P1S
⏱ 90h 14m · 1399 g · 2 material(s) · needs AMS
Prints on: P1S 0.4, H2S 0.4, X1 0.4, X1E 0.4, P2S 0.4, P1P 0.4, A1 0.4, H2D Pro 0.4, H2C 0.4, A2L 0.4, X1 Carbon 0.4, H2D 0.4, X2D 0.4PLAPLA
Not printable on our printers
Optimized Supports & Lightweight Bambu H2D & H2C
⏱ 40h 43m · 695 g · 2 material(s) · needs AMS
Prints on: H2D 0.4, X2D 0.4, H2C 0.4, H2D Pro 0.4PLAPLA
Not printable on our printers
Lightweight & Optimized Supports P1S & A1 & X series
⏱ 84h 50m · 1304 g · 2 material(s) · needs AMS
Prints on: P1S 0.4, H2D Pro 0.4, A2L 0.4, H2S 0.4, H2D 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4, X2D 0.4PLAPLA
Not printable on our printers