Hanging Spider-Man 🕷️ 19/04 – Colour Version Update 🎨 A colour print profile has now been added. Pre cut and a cut version - I printed the cut version but the pre cut version is a lot less time and waste. I initially missed a section during the colouring process, but this has now been corrected in the updated profile. There may still be opportunities to reduce filament waste by adjusting orientation or splitting the model across multiple plates. If you find a more efficient setup, feel free to upload and share your print profile! A dynamic hanging Spider-Man model designed to be displayed mid-swing, perfect for adding a bit of action to your setup, shelf, or workspace. This model is designed to hang using string, rope, or fishing line, giving the illusion of Spider-Man dropping in from above. Great as a decorative piece or a fun print for fans. Important Note ⚠️ This version has been cut for easier printing and assembly, however the join may require a bit of cleanup depending on your printer and settings. Some light sanding or careful gluing may be needed for the cleanest finish. 👉 I have also included the uncut version of the model if you’d prefer to print it as a single piece or try your own cutting approach for a better result. Print Settings (used on my P2S): 0.16mm Layer Height 2 Walls 15% Infill Supports required (tree supports recommended for best results) A fun print that looks great hanging once finished — would love to see your makes and how you display it! Boost Me

High Detail - Hanging Spiderman

by Badboyturnz · original on MakerWorld ↗

♥ 3.5k⬇ 3.5k🖨 2.3k prints

Print profiles

• 0.16mm Cut version

  ⏱ 3h 1m · 39 g · 1 material(s)

  Prints on: P2S 0.4, H2D Pro 0.4, X1E 0.4, A1 mini 0.4, A1 0.4, H2S 0.4, P1P 0.4, P1S 0.4, X1 0.4, H2C 0.4, X2D 0.4, H2D 0.4, X1 Carbon 0.4, A2L 0.4PLA

  Not in stock

• 0.16mm Pre-cut

  ⏱ 3h 19m · 48 g · 1 material(s)

  Prints on: P2S 0.4, H2C 0.4, X2D 0.4, A1 mini 0.4, X1 Carbon 0.4, P1S 0.4, H2S 0.4, A1 0.4, P1P 0.4, X1E 0.4, X1 0.4, H2D Pro 0.4, H2D 0.4, A2L 0.4PLA

  Not in stock

• 0.16mm Cut Colour

  ⏱ 18h 56m · 314 g · 4 material(s) · needs AMS

  Prints on: P2S 0.4, H2D Pro 0.4, X1E 0.4, A1 0.4, H2S 0.4, P1P 0.4, P1S 0.4, X1 0.4, H2C 0.4, X2D 0.4, H2D 0.4, X1 Carbon 0.4, A2L 0.4PLAPLAPLAPLA

  Not printable on our printers

• 0.16mm Pre Cut Colour

  ⏱ 12h 40m · 201 g · 4 material(s) · needs AMS

  Prints on: P2S 0.4, X2D 0.4, X1 0.4, A1 0.4, H2S 0.4, P1P 0.4, P1S 0.4, X1E 0.4, H2D Pro 0.4, H2D 0.4, X1 Carbon 0.4, H2C 0.4, A2L 0.4PLAPLAPLAPLA

  Not printable on our printers

• Minimal Supports, pre-cut

  ⏱ 3h 19m · 31 g · 1 material(s)

  Prints on: P2S 0.4, A1 0.4, H2D Pro 0.4, H2C 0.4, X1 Carbon 0.4, X2D 0.4, P1S 0.4, X1 0.4, H2D 0.4, A1 mini 0.4, X1E 0.4, A2L 0.4, H2S 0.4, P1P 0.4PLA

  Not in stock

• 0.16mm layer, 2 walls, 15% infill

  ⏱ 14h 47m · 185 g · 4 material(s) · needs AMS

  Prints on: A1 mini 0.4, X1 0.4, A2L 0.4, A1 0.4, P1P 0.4, H2S 0.4, P2S 0.4, P1S 0.4, H2D 0.4, X2D 0.4, H2D Pro 0.4, X1E 0.4, H2C 0.4, X1 Carbon 0.4PLAPLAPLAPLA

  Not in stock