🖨️ Print Shop
Iron Spider Helmet

Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268 Uses 8x2mm Magnets, - Be sure to use the magnets in the BOM as they were tested and work properly. Magnets in total for the build - 8x2mm = 20 in total Use Super Glue "I use the gel kind" when inserting the Magnets, and Frames Enjoy

Iron Spider Helmet

by Budwin · original on MakerWorld ↗

♥ 710⬇ 539🖨 192 prints

License: Standard Digital File LicenseSpidermanIron Mancomicspropscosplaybudwinpeterparker

Print profiles

  • IronSpider-Sliced-H2S-AMS

    ⏱ 40h 35m · 909 g · 3 material(s) · needs AMS

    Prints on: H2S 0.4, A2L 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4PLAPLAPLA

    Not printable on our printers

  • IronSpider-Sliced-P1S-AMS

    ⏱ 45h 23m · 887 g · 3 material(s) · needs AMS

    Prints on: P1S 0.4, A2L 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, H2S 0.4, P2S 0.4, A1 0.4, P1P 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4, X2D 0.4PLAPLAPLA

    Not printable on our printers