This prank spider box will give anyone who opens it a big surprise! Great for April Fools day! Snaps together, no additional glue or materials needed Box has a lid stop built in so no one can take the lid off the box You can choose a blank side for the box or a side that can hold a sign Multiple signs to choose from. Please message me if you want me to make a different sign Print profile optimized for good connections and minimal supports Steps to put together. You MUST put the lid on before the side of the box. If you forget, you can always snap the side off again 1.Put the spider on the gear 2. Place the gear on the axle in the box 3. Place the lid on the box. It is easiest if you angle the lid slightly and slide it into the track. Be sure the side of the lid is fully sitting in the track of the box 4. Align the gear to the optimal position so the spider has space to rise out of the box 5. Snap the side of the box in place. Be sure to remove ALL remnants of supports to ensure parts sit flush together 6. If you choose the side with a sign, snap a sign in place Leave the box somewhere for your unsuspecting victim!

Prank Spider Box (Snaps together!)

by Biochem · original on MakerWorld ↗

♥ 2.4k⬇ 4.7k🖨 3.5k prints

License: Standard Digital File Licensespiderpranksurpriseboxsuggestioncandydo not opentake oneapril foolsaprilfools

Print profiles

0.2mm layer, 2 walls, 10% infill
⏱ 8h 35m · 312 g · 3 material(s) · needs AMS
Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLA
Not printable on our printers
A1 mini, 90%, 0.2mm layer, 2 walls, 10% infill
⏱ 8h 32m · 250 g · 3 material(s) · needs AMS
Prints on: A1 mini 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLA
Not in stock
0.2mm layer, 2 walls, 10% infill
⏱ 9h 48m · 313 g · 3 material(s) · needs AMS
Prints on: A1 mini 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLA
Not in stock
Sphere / Knob - 2 Gramm / 2 Minuten
⏱ 15m · 3 g · 1 material(s)
Prints on: P2S 0.4, P1S 0.4, H2C 0.4, H2S 0.4, P1P 0.4, H2D 0.4, X1 0.4, X1E 0.4, A1 mini 0.4, X1 Carbon 0.4, A1 0.4, H2D Pro 0.4, X2D 0.4, A2L 0.4PLA
Not in stock
[TPU Spinne] Einfach zu entfernende Supports
⏱ 30m · 3 g · 1 material(s)
Prints on: A1 mini 0.4, H2C 0.4, P1P 0.4, H2D Pro 0.4, P2S 0.4, A1 0.4, X1 0.4, X1E 0.4, X1 Carbon 0.4, H2S 0.4, P1S 0.4, H2D 0.4, X2D 0.4, A2L 0.4TPU
Not in stock
Texto personalizado!!!
⏱ 1h 54m · 46 g · 2 material(s) · needs AMS
Prints on: P1S 0.4, X1E 0.4, X1 0.4, H2D Pro 0.4, H2D 0.4, A1 0.4, H2C 0.4, X1 Carbon 0.4, H2S 0.4, P2S 0.4, A1 mini 0.4, P1P 0.4, X2D 0.4, A2L 0.4PLAPLA
Not in stock