SPIDERMAN Marvel inspired Figure Size: 500 % (~21 cm) Printing: (see print profile uploaded by me) - PLA - Layer: 0,20 mm - Support: Tree support / normal support (side cutters / pliers are needed for removal) - Brim: Recommended for a few parts Depending on how your printer and filament is calibrated, you may need to scale the parts up to 1% up or down. - Multi-colored print - 1 AMS is needed for this Assembly: - Simply put everything together, no glue is needed. Please consider giving this model a boost, it helps me continue to make free models Every boost is appreciated - Thank you!!! Boost Me

Spiderman * Super Heroes * 500% ~21cm

by HeiHei · original on MakerWorld ↗

♥ 562⬇ 969🖨 750 prints

License: Standard Digital File Licensemarvelsuper heroessuperherosuper herospidermanspider manpeterparkerpeterparker

Print profiles

0.2mm layer, AMS needed
⏱ 22h 60m · 456 g · 4 material(s) · needs AMS
Prints on: X1 Carbon 0.4, P1P 0.4, X1E 0.4, P2S 0.4, A1 0.4, X1 0.4, H2D Pro 0.4, H2D 0.4, H2S 0.4, P1S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA
Not printable on our printers