A quick lil spider for left over Filament. It can look quite realistic on the first look. You can bend the legs after printing on the thinner joints. I made a new one with a hole in the back so you can put some strings through it. https://makerworld.com/en/models/459884 I also fixed the cross on its back and added some fillets for smoother prints. Enjoy!

Flexi Spider

by Tortel3D · original on MakerWorld ↗

♥ 1.9k⬇ 11.2k🖨 10.6k prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 13m · 2 g · 1 material(s)

  Prints on: A1 mini 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

  Not in stock

• 70mm long, 0.16mm high quality layer, 2 walls, 15% infill

  ⏱ 14m · 2 g · 1 material(s)

  Prints on: A1 mini 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

  Not in stock

• 0.2mm nozzle, 0.1mm layer, 4 walls, 14% infill

  ⏱ 29m · 2 g · 1 material(s)

  Prints on: A1 0.2, H2D 0.2, H2D Pro 0.2, H2S 0.2, P2S 0.2, H2C 0.2, X2D 0.2, A2L 0.2PLA

  Not printable on our printers

• A1 Mini 0.2mm nozzle variable layer height

  ⏱ 41m · 2 g · 1 material(s)

  Prints on: A1 mini 0.2, P1S 0.2, P1P 0.2, X1 0.2, X1 Carbon 0.2, X1E 0.2, A1 0.2, H2D 0.2, H2D Pro 0.2, H2S 0.2, P2S 0.2, H2C 0.2, X2D 0.2, A2L 0.2PLA

  Not printable on our printers