🖨️ Print Shop
Halloween Hairpin

Add a subtle spooky touch to any hairstyle with this set of 3D-printed Halloween hairpins. The designs are clean, cute and print-friendly: a floating Ghost , smiling Spider , minimalist Skull , winged Bat , chibi Skeleton , and bunny mask . Each model is optimized as a lightweight hair fork/hairpin with smooth contours, rounded edges, and through-cut eyes/mouth for that crisp silhouette. What’s inside 6 fronts + matching flat backs (for two-piece “slide + stick” use). One-piece 2-prong hair-fork versions. Mirrored files where relevant. Recommended print settings Material: PLA or PETG (PLA+ holds shape well). Nozzle 0.4 mm, layer height 0.16 mm (0.12 mm for finer edges). Walls: 3–4 perimeters; Top/Bottom: 4–5; Infill: 15–20% (Grid/Gyroid). Orientation: print fronts/backs flat on the bed; print sticks/forks vertically with a brim (no supports). Bed adhesion: build-plate glue or 3–5 mm brim for forks. Assembly & fit Use the two-piece “slide” with a separate stick, or the one-piece 2-prong fork. Lightly sand mating faces; optionally add a tiny drop of CA glue for permanent sets. Smooth any edges that contact hair. Finishing ideas Prime + acrylics; seal with matte varnish. Classic palettes: bone beige, coal black, warm gold; or pearlescent accents for highlights. Take a look at my other models

Halloween Hairpin

by Root And Ray · original on MakerWorld ↗

♥ 2.0k⬇ 2.8k🖨 2.1k prints

License: Standard Digital File Licensehalloween hairpin3d printed hairpinhair forkhair stickhair slideghost hairpinspider hairpinskull hairpinbat hairpinskeleton hairpinspooky cutekawaii halloweencosplay accessorycostume partygothic accessoryhairpinhair pin

Print profiles

  • skeleton

    ⏱ 1h 10m · 13 g · 1 material(s)

    Prints on: P1S 0.4, H2C 0.4, X2D 0.4, X1 0.4, H2D Pro 0.4, H2S 0.4, A1 0.4, A1 mini 0.4, P2S 0.4, P1P 0.4, X1 Carbon 0.4, X1E 0.4, H2D 0.4, A2L 0.4PLA

    Not in stock

  • scull

    ⏱ 60m · 13 g · 1 material(s)

    Prints on: P1S 0.4, X1 0.4, H2D 0.4, P1P 0.4, X1E 0.4, P2S 0.4, X2D 0.4, H2D Pro 0.4, H2S 0.4, A1 0.4, A1 mini 0.4, H2C 0.4, X1 Carbon 0.4, A2L 0.4PLA

    Not in stock

  • bat

    ⏱ 1h 4m · 14 g · 1 material(s)

    Prints on: P1S 0.4, P1P 0.4, H2C 0.4, H2S 0.4, X1 0.4, P2S 0.4, X2D 0.4, A1 mini 0.4, H2D Pro 0.4, X1 Carbon 0.4, H2D 0.4, X1E 0.4, A1 0.4, A2L 0.4PLA

    Not in stock

  • spider

    ⏱ 1h 5m · 13 g · 1 material(s)

    Prints on: P1S 0.4, A1 0.4, X2D 0.4, X1E 0.4, A1 mini 0.4, X1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, X1 Carbon 0.4, P1P 0.4, H2C 0.4, A2L 0.4PLA

    Not in stock

  • labu

    ⏱ 1h 19m · 14 g · 1 material(s)

    Prints on: P1S 0.4, H2S 0.4, H2D Pro 0.4, A1 mini 0.4, H2D 0.4, P2S 0.4, X1 0.4, X2D 0.4, X1 Carbon 0.4, P1P 0.4, H2C 0.4, A1 0.4, X1E 0.4, A2L 0.4PLA

    Not in stock

  • scull, skeleton, ghost, spider, bat, labu.. 0.12, 15% infill

    ⏱ 6h 42m · 80 g · 1 material(s)

    Prints on: P1S 0.4, X1E 0.4, P1P 0.4, P2S 0.4, H2S 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4, A1 mini 0.4, A1 0.4, X1 0.4, X2D 0.4, X1 Carbon 0.4, A2L 0.4PLA

    Not in stock

  • ghost

    ⏱ 1h 3m · 13 g · 1 material(s)

    Prints on: P1S 0.4, A1 0.4, A2L 0.4, P1P 0.4, H2S 0.4, A1 mini 0.4, H2C 0.4, H2D Pro 0.4, X2D 0.4, P2S 0.4, X1 0.4, H2D 0.4, X1E 0.4, X1 Carbon 0.4PLA

    Not in stock