The Araxys Vandal 1:1 Boost Me If you enjoy this model consider boosting me ! Bring the Vandal to real life – over 1 meter long! This multipart model comes in 7 pieces , designed with a dowel system for easy and precise assembly. You’ll just need a bit of glue to secure everything once in place. The only separate part to glue is the trigger scale , everything else fits together smoothly thanks to the dowels. Build your own full-sized Araxys Vandal and display it proudly! I highly recommend using Metal Copper filament since its really close to the original skin and looks absolutely awesome ! (And its really easy to use) The scale is on this part (bottom right of the picture) : And you will need to glue it to this part (on the bottom left of the picture) : Its really straight forward but its better to indicate it just in case :) Here is an assembly view to let you see the different pieces of the vandal : All the dowels are the same size except for the two in the nozzle which are slightly smaller

Araxys Vandal - Valorant

by ∆xel · original on MakerWorld ↗

♥ 235⬇ 370🖨 99 prints

Print profiles

• 0.2mm layer, 2 walls, 10% infill

  ⏱ 28h 5m · 864 g · 1 material(s)

  Prints on: P1S 0.4, X1 Carbon 0.4, A1 0.4, H2S 0.4, X1 0.4, P1P 0.4, H2D Pro 0.4, X1E 0.4, H2D 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

  Not printable on our printers