Spider-Punk 2099 Marvel Rivals Helmet Spikes are numbered for easy assembly. Translucent Red PLA can be used for the spider symbol if you plan on making it glow. This filament was added to the BOM incase you wanted to go that route and Is absolutely not necessary. Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268 Uses 8x2mm and 6x2mm Magnets, - Be sure to use the magnets in the BOM as they were tested and work properly. Magnets in total for the build - 8x2mm =18 in total - 6x2mm = 24 in total Use Super Glue "I use the gel kind" when inserting the Magnets, Spikes and Lens. A quick PSA for those that care. Im going to be away from home the next week for vacation. During this time I will be finishing a few things I have on my work computer. I wont have time to post model progression in the community tab so you will have to wait until its released to be notified.

Spider-Punk 2099 Helmet

by Budwin · original on MakerWorld ↗

♥ 841⬇ 843🖨 315 prints

License: Standard Digital File Licensespider-manspider-punkspiderpunkcosplaybudwinhelmetmaskmarvelmanspidermanspiderpunkpeterparker

Print profiles

Spider-Punk-2099-Sliced-100%-NO-AMS
⏱ 40h 10m · 872 g · 3 material(s)
Prints on: P1S 0.4, H2D 0.4, H2S 0.4, X2D 0.4, A2L 0.4, H2C 0.4, X1E 0.4, P1P 0.4, P2S 0.4, H2D Pro 0.4, X1 Carbon 0.4, X1 0.4, A1 0.4PLAPLAPLA
Not printable on our printers
0.16mm layer, 2 walls, 15% infill
⏱ 60h 58m · 1017 g · 4 material(s)
Prints on: H2D 0.4, H2C 0.4, H2S 0.4, H2D Pro 0.4, A2L 0.4PLAPLAPLAPLA
Not printable on our printers