Hey everyone! A brand new STL file is now available for you – an articulated tarantula with smooth joints and a wicked cool design. Perfect for your next 3D print! License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any way, please visit my Patreon for licensing options and to support future designs. This model is: ✅ Fully articulated ✅ Print-in-place ready ✅ Fun to pose and freak out your friends 😄 Material: PLA (recommended) Layer Height: 0.2 - 0.15 mm Infill: 15% or higher Supports: Not required. If you experience any adhesion issue consider using a 3–5 mm brim. Print Orientation: Default orientation – model is laid flat on its belly for optimal results. 📏 Print Size & Warning This model was tested and successfully printed at the following dimensions: X: 17.6 cm | Y: 15.5 cm | Z: 4 cm ⚠ Important: Reducing the size of the model may result in weaker leg joints , which could affect articulation or cause parts to break more easily during printing or handling. For best results, I recommend printing at the tested size or larger. If you like this design, you'll love the rest of my MakerWorld collection. Click the image to explore more!

Articulated Tarantula

by KOGI3D · original on MakerWorld ↗

♥ 2.6k⬇ 5.6k🖨 3.1k prints

Print profiles

• 0.15mm layer, 2 walls, 15% infill

  ⏱ 4h 32m · 75 g · 1 material(s)

  Prints on: A1 0.4, P1S 0.4, A1 mini 0.4, A2L 0.4, H2C 0.4, X1 Carbon 0.4, X2D 0.4, X1E 0.4, H2D Pro 0.4, H2S 0.4, H2D 0.4, P2S 0.4, X1 0.4, P1P 0.4PLA

  Not in stock

• sequential 1 plate no AMS, 0.16mm layer, 2 walls, 10% infill

  ⏱ 3h 53m · 68 g · 2 material(s) · needs AMS

  Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4PLAPLA

  Not printable on our printers