Boost Me This helps me continue my work by using the credits to fund upgrades and purchase filament for RND. Thank you!! Thank you for checking out the Spider-Man Inspired BB Shooter! -------------------------------------------------------------------------------------------------------- Safety Warning: Not for children under 12 years old without adult supervision Do not aim at eyes or face Do not aim at animals Use only with 3D-printed BBs or soft plastic pellets Always test in a safe, open area This is a toy, but it can still cause injury if misused With great power comes great responsibility — shoot safe, web-head! No villains (or siblings) were harmed during testing… let’s keep it that way. Assembly Disclaimer: This build may be a bit tricky, especially if you're new to mechanical or 3D-printed projects, but trust me, it's worth it. What some might see as a challenge is actually one of its greatest strengths: the shooter is fully modular. If a part breaks (as plastic sometimes does), you won’t need to start from scratch. Just reprint the piece you need, snap it in, and you’re back in action. Built to play hard and built to be fixed just as easily. Facts: Uses 6mm BB pellets Fires up to 10 BBs per magazine 3D printed spring-loaded return mechanism Locking magazine with a quick eject feature for fast reloads Uses a thin 3D printed strap (has only been tested with PLA) Includes Strap-mounted mag holders for on-the-go reloading Designed for easy 3D printing and rough play Lightweight, compact, and cosplay-friendly Parts are easy to swap in case of damage Update Log: v1.2 - Added a new plate with a new strap with rectangular holes and improved locking system for people to try and test out (9-11-2025) v1.1 - Updated assembly guide: Added clear step-by-step process for breaking-in print-in-place components (6-13-2025) v1.0 - Initial Release For improved shooting experience, try this: After pressing down on the trigger, let the trigger release by sliding your fingers off, which lets it slip off. This avoids jamming. If the mechanism does jam, just give it a shake or two, and engage the trigger using the slip-tactic. That should un-jam on most cases. ---------------------------------------------------------------------------------------------------------------------------------- What began as a fun request from my nephew turned into a project I’ve grown passionate about. If you enjoyed the build, a BOOST would mean a lot as it helps me keep creating and even scored me a free AMS! Again, thank you to EVERYONE for supporting me by leaving comments, liking, printing, and boosting. You guys are awesome :) Got feedback or ideas? Please drop a comment, I’m always looking to improve. - MechBrick.

Spidey BB Shooter MK-I | Fully 3D Printed

by MechBrick. · original on MakerWorld ↗

♥ 4.2k⬇ 4.1k🖨 2.1k prints

Print profiles

• 0.2mm layer, 2 walls, 20% infill

  ⏱ 9h 51m · 164 g · 2 material(s) · needs AMS

  Prints on: P1P 0.4, P2S 0.4, H2C 0.4, X1 Carbon 0.4, X1E 0.4, H2D Pro 0.4, A1 0.4, P1S 0.4, H2D 0.4, H2S 0.4, X1 0.4, X2D 0.4, A2L 0.4PLAPLA

  Not printable on our printers

• A1 Mini - Extra Strap Options

  ⏱ 8h 40m · 64 g · 2 material(s) · needs AMS

  Prints on: A1 mini 0.4, A1 0.4, X1 Carbon 0.4, H2D 0.4, P1S 0.4, P1P 0.4, H2S 0.4, X1E 0.4, H2D Pro 0.4, H2C 0.4, X1 0.4, P2S 0.4, X2D 0.4, A2L 0.4PLAPLA

  Not in stock

• 10 x Optimized BBs

  ⏱ 26m · 2 g · 1 material(s)

  Prints on: P2S 0.4, A1 0.4, X1 0.4, H2S 0.4, X1 Carbon 0.4, X1E 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4, P1P 0.4, P1S 0.4, A1 mini 0.4, X2D 0.4, A2L 0.4PLA

  Not in stock