split the model into different parts and plates for non ams printers. you can use glue but i used a torch to heat the connection points on the yellow parts to weld to the body. the eye parts will snap together. the 3mf has all the settings i used. it is an orca file.

Spyro

by Dragon 82 · original on MakerWorld ↗

♥ 719⬇ 1.7k🖨 566 prints

License: BY-NCspyrodragon

Print profiles

0.16mm layer, 2 walls, 15% infill
⏱ 14h 36m · 151 g · 4 material(s)
Prints on: P1S 0.4, A1 0.4, P2S 0.4, P1P 0.4, H2S 0.4, X1 0.4, X1 Carbon 0.4, H2C 0.4, H2D 0.4, X1E 0.4, H2D Pro 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA
Not printable on our printers
140% vergrößert, 0.16mm layer, 2 walls, 10% infill,
⏱ 22h 12m · 345 g · 5 material(s)
Prints on: P1S 0.4, X1E 0.4, X1 0.4, H2C 0.4, H2S 0.4, H2D Pro 0.4, P2S 0.4, X1 Carbon 0.4, A1 0.4, P1P 0.4, H2D 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLAPLA
Not printable on our printers