Spider-Man OG Textured Helmet Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268 Uses 8x2mm and 6x2mm Magnets, - Be sure to use the magnets in the BOM as they were tested and work properly. Magnets in total for the build - 8x2mm =18 in total - 6x2mm = 20 in total Use Super Glue "I use the gel kind" when inserting the magnets and Lens. Enjoy

Spider-Man House Of M Textured Helmet

by Budwin · original on MakerWorld ↗

♥ 3.2k⬇ 7.6k🖨 2.3k prints

Print profiles

• Spider-Man OG 100% AMS

  ⏱ 100h 48m · 1588 g · 3 material(s) · needs AMS

  Prints on: P1S 0.4, H2D Pro 0.4, A2L 0.4, H2S 0.4, H2D 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, X2D 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4PLAPLAPLA

  Not printable on our printers

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 95h 43m · 1462 g · 3 material(s) · needs AMS

  Prints on: X1 Carbon 0.4, X1 0.4, A1 0.4, H2S 0.4, H2C 0.4, X2D 0.4, P1S 0.4, A2L 0.4, H2D 0.4, P1P 0.4, X1E 0.4, P2S 0.4, H2D Pro 0.4PLAPLAPLA

  Not printable on our printers

• 0.2mm layer, 2 walls, 10% infill

  ⏱ 19m · 5 g · 1 material(s)

  Prints on: A1 mini 0.4, H2D 0.4, A2L 0.4, H2D Pro 0.4, X1E 0.4, A1 0.4, X1 Carbon 0.4, H2C 0.4, X2D 0.4, P1S 0.4, H2S 0.4, X1 0.4, P1P 0.4, P2S 0.4PLA

  Not in stock

• H2d Scaled to 106% less supports can print on sport mode.

  ⏱ 54h 17m · 828 g · 3 material(s) · needs AMS

  Prints on: H2D 0.4, H2D Pro 0.4, H2C 0.4, A2L 0.4, H2S 0.4PLAPLAPLA

  Not printable on our printers