Boost Me Boost Me (for free) Thank you for downloading! If possible, leave a like, comment, and boost to support the work. 😊 🕷 This Spider-Man-inspired piggy bank was designed for FDM 3D printing, balancing detail, material efficiency, and print time. The modular design allows for an easier assembly and improves the final quality without compromising part fits. ⚠ IMPORTANT: The original scale must not be changed, as this could affect the fit of the parts and the functionality of retrieving the money. Additionally, banknotes may get stuck inside the piggy bank . To allow for their removal without damaging the model, it is recommended not to glue the eyes , so they can be taken out if needed. 📏 Model Specifications: Height: 32 cm Recommended layer height: 0.24mm (optimized for faster printing) Supports: Required for several parts (follow the included print profile) Tested on: FDM printing Compatible materials: Various, but PLA is the most recommended Assembly: Model split into multiple parts for easier printing Positioning guides: Several alignment points for precise assembly Attachment: Parts should be glued together, except for the eyes, which can be snapped in without glue Head options: Two versions available – a single-piece head or a three-piece head (recommended) 🛠 Printing Tips: Use supports as indicated in the provided print profile PLA is recommended for better adhesion and print quality Do not resize the model to avoid assembly issues 📌 Final Notes: This model was designed to be fast and efficient to print, but there’s always room for improvement! If you have any suggestions or want to share your printed version, feel free to do so. 📩 Questions? If you need any assistance, don’t hesitate to contact me! I’ll be happy to help.

Spider-Man Piggy Bank (32cm)

by Wingdesk · original on MakerWorld ↗

♥ 483⬇ 859🖨 270 prints

License: Standard Digital File LicensebabyspidermanSpidermanspidermanspiderman 2spiderman 2099spiderman 3homem aranhaSpiderpiggy bankpiggy bank coinpiggybankforkidskidskidsbedroomdecorkidsdecorationboysbedroomboybedroommoviesaranhamoneymoney banksavemoneyeasytoprintcoolcoolforkids

Print profiles

0.24mm layer, 2 walls, 15% infill
⏱ 47h 5m · 1121 g · 4 material(s) · needs AMS
Prints on: A1 0.4, P1S 0.4, P1P 0.4, X1 Carbon 0.4, X1E 0.4, X1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA
Not printable on our printers
0.24mm layer, 2 walls, 15% infill
⏱ 42h 36m · 1039 g · 4 material(s) · needs AMS
Prints on: A1 0.4, P1S 0.4, P1P 0.4, X1 Carbon 0.4, X1E 0.4, X1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA
Not printable on our printers