V3 Update: Everyone I show this to wants one so I made the effort to clean it up and make it easier to use. Filaments used in still pics: Dragon - OVV3D Tri-Color PLA - Red, Yellow, Blue - Amazon link (no affiliation) - https://a.co/d/h7g1v2X Base - MIKA3D Silk Shiny PLA - Silk Gold - Amazon link (no affiliation) - https://a.co/d/3jUFsBn Changes: Fixed top surface of the lid, there were some artifacts from the original model Made the incense insertion access hole much bigger Modified the lid to remove overhangs Modified the lid to use gyroid infill at 25% to help prevent the lid from warping Fixed some small areas in the main body that were unsupported cantilevers Turned off ironing, I've noticed different filaments need different flow percentage settings. Ironing looks nice on this if you tune flow % to your filament. Added support blocking to the holes in the dragon's feet V2: ***UPDATED*** I apologize, I uploaded the wrong version. This one has negative parts added so it's easier to insert the incense. Remix of the Smoking Dragon Incense Burner cut and placed for P1 or X Series

UPDATED - Smoking dragon incense holder

by ctcarlton · original on MakerWorld ↗

♥ 1.7k⬇ 3.5k🖨 1.2k prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 10h 34m · 274 g · 1 material(s)

  Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

  Not printable on our printers

• fixed first layer, 0.2mm layer, 2 walls, 10% infill

  ⏱ 9h 25m · 243 g · 1 material(s)

  Prints on: P1S 0.4, H2S 0.4, H2D Pro 0.4, P1P 0.4, H2C 0.4, A1 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, P2S 0.4, H2D 0.4, X2D 0.4, A2L 0.4PLA

  Not printable on our printers