Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic blue silk Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 4 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Scarlet Red At layer #12 (1.04mm) swap to blue sil At layer #20 (1.68mm) swap to Jade White for the rest.

Spiderman hueforge painted final

by Giamma933 · original on MakerWorld ↗

♥ 3.6k⬇ 8.7k🖨 4.7k prints

Print profiles

• 0.08mm layer, 1 walls, 100% infill

  ⏱ 4h 3m · 29 g · 1 material(s)

  Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

  Not printable on our printers

• AMS 0.08mm layer, 1 walls, 100% infill

  ⏱ 4h 10m · 31 g · 4 material(s) · needs AMS

  Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA

  Not printable on our printers

• 0.08mm layer, 1 walls, 100% infill

  ⏱ 4h 29m · 31 g · 4 material(s) · needs AMS

  Prints on: A1 0.4, P1S 0, P1P 0, X1 Carbon 0, X1E 0, X1 0, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA

  Not printable on our printers

• 50% size, 0.08mm layer, 1 walls, 100% infill, faster print

  ⏱ 1h 38m · 9 g · 4 material(s) · needs AMS

  Prints on: A1 0.4, P1S 0.4, P1P 0.4, X1 Carbon 0.4, X1E 0.4, X1 0.4, A1 mini 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA

  Not in stock