🖨️ Print Shop
Flexi Skeleton Spider V2

Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion! ⚠Warning⚠ Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. Do not scale the spider any smaller otherwise the connections will no longer work! If you apply too much force to the legs they may break because the connections are small! Please be careful when removing the spider from the print bed! Colors and filament I used (1 Color): PLA Matte / Bone White Boost Me If you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!

Flexi Skeleton Spider V2

by 3DPrintyi · original on MakerWorld ↗

♥ 5.0k⬇ 11.2k🖨 7.9k prints

License: Standard Digital File Licensespiderarticulatedskeletonflexiflexible

Print profiles

  • 0.2mm layer, 2 walls, 15% infill

    ⏱ 1h 16m · 19 g · 1 material(s)

    Prints on: P1S 0.4, H2D 0.4, H2S 0.4, A1 0.4, H2D Pro 0.4, A1 mini 0.4, X2D 0.4, X1E 0.4, A2L 0.4, P1P 0.4, P2S 0.4, X1 Carbon 0.4, X1 0.4, H2C 0.4PLA

    Not in stock

  • Version XL / 0.16mm layer, 3 walls, 15% infill

    ⏱ 3h 47m · 65 g · 1 material(s)

    Prints on: X1 Carbon 0.4, P2S 0.4, A2L 0.4, H2S 0.4, X1E 0.4, X1 0.4, P1P 0.4, A1 0.4, H2D 0.4, P1S 0.4, H2C 0.4, X2D 0.4, H2D Pro 0.4PLA

    Not printable on our printers

  • Version L / 0.16mm layer, 3 walls, 15% infill

    ⏱ 3h 48m · 60 g · 1 material(s)

    Prints on: X1 Carbon 0.4, P2S 0.4, A2L 0.4, H2S 0.4, A1 mini 0.4, X1E 0.4, X1 0.4, P1P 0.4, A1 0.4, H2D 0.4, P1S 0.4, H2C 0.4, X2D 0.4, H2D Pro 0.4PLA

    Not in stock

  • Version M / 0.16mm layer, 3 walls, 15% infill

    ⏱ 3h 18m · 53 g · 1 material(s)

    Prints on: X1 Carbon 0.4, P1P 0.4, H2D Pro 0.4, P2S 0.4, X1 0.4, X1E 0.4, X2D 0.4, A1 mini 0.4, A2L 0.4, H2C 0.4, H2S 0.4, A1 0.4, H2D 0.4, P1S 0.4PLA

    Not in stock

  • Version S / 0.16mm layer, 3 walls, 15% infill

    ⏱ 2h 49m · 46 g · 1 material(s)

    Prints on: X1 Carbon 0.4, P2S 0.4, H2C 0.4, X1E 0.4, A1 mini 0.4, H2D 0.4, P1S 0.4, H2S 0.4, P1P 0.4, X2D 0.4, X1 0.4, H2D Pro 0.4, A2L 0.4, A1 0.4PLA

    Not in stock