High density model of Flexi crystal spider Print in place Recommend dont scale down much due to joins Format STL Created in Blender 2 Perimeters 15% infill No supports

Flexi crystal spider

by uni3Dworld · original on MakerWorld ↗

♥ 1.6k⬇ 2.8k🖨 1.7k prints

Print profiles

• 0.12mm layer, 2 walls, 15% infill

  ⏱ 16h 38m · 178 g · 1 material(s)

  Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

  Not printable on our printers

• 0.2mm layer, 2 walls, 7% cross hatch infill - silk shiny

  ⏱ 9h 12m · 162 g · 1 material(s)

  Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

  Not printable on our printers