Anti Venom Textured Spider-Man Ps5 Helmet Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268 Uses 8x2mm and 6x2mm Magnets, - Be sure to use the magnets in the BOM as they were tested and work properly. Magnets in total for the build - 8x2mm =18 in total - 6x2mm = 36 in total Use Super Glue " I use the gel kind " when inserting the magnets and Lens. Enjoy Red Hood textured helm had a mirror set back during test printing. The problem was fixed and more testing needs to be done to ensure the model prints perfectly. The newly applied texture added some material that caused the tolerances to get a little wonky. That caused the helm and the back to not line up properly leaving a large unsightly gap between the two parts. I will keep you updated on it progress in the community tab.

Anti Venom Ps5 Helmet

by Budwin · original on MakerWorld ↗

♥ 1.2k⬇ 1.7k🖨 749 prints

Print profiles

• Anti-Venom-Ps5-Helm-Sliced-100%

  ⏱ 26h 3m · 638 g · 2 material(s)

  Prints on: P1S 0.4, H2D Pro 0.4, P2S 0.4, P1P 0.4, X2D 0.4, X1 0.4, X1E 0.4, A2L 0.4, A1 0.4, H2D 0.4, H2C 0.4, X1 Carbon 0.4, H2S 0.4PLAPLA

  Not printable on our printers

• Reduced Sized 90%

  ⏱ 21h 32m · 506 g · 2 material(s)

  Prints on: X1 Carbon 0.4, H2D 0.4, A2L 0.4, H2D Pro 0.4, X1E 0.4, A1 0.4, X2D 0.4, H2C 0.4, P1S 0.4, H2S 0.4, X1 0.4, P1P 0.4, P2S 0.4PLAPLA

  Not printable on our printers

• 50% Mini, 1 piece AMS

  ⏱ 21h 53m · 351 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, X1E 0.4, X1 0.4, P2S 0.4, H2D Pro 0.4, P1P 0.4, X1 Carbon 0.4, A1 mini 0.4, H2D 0.4, P1S 0.4, H2C 0.4, X2D 0.4, A2L 0.4, H2S 0.4PLAPLA

  Not in stock