ℹ Tips for printing:
Filament: PLA
Supports: No!
Layer height: 0.16(0.15)mm or 0.2mm
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: -
Brim: No!
BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
Info‼: Do not scale the Crab any smaller otherwise the connections will no longer work!
Info‼: If you apply too much force to the connections they may break because the connections are small!
Info‼: Please be careful when removing the Crab from the print bed!
------------------------------------------------------
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (1 Color):
PLA Matte / BoneWhite
Or decide for yourself which colors and how many you want to use!
Articulated Skeleton Hermit Crab
by 3DPrintyi · original on Printables ↗
World & Scans / Animals
♥ 242⬇ 1.0k🖨 5 prints
Print profiles
ArticulatedSkeletonHermitCrab.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_PrusaSlicerXL.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_PrusaSlicerCoreOne.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioP2S.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioH2S.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioH2C.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioA1mini.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioX2D.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioH2D.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioA2L.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonHermitCrab_BambuStudioA1.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print