One of the most daunting and feared creatures of the night

With 17 body segments and 30 articulated legs it feels even more alive than typical 3D printed dragons (...if you dare). Loosely modelled after the giant redheaded centipede.

Suggested print settings (0.4mm nozzle)

• 3 walls

• 0.50mm perimeter line width

• 15% rectilinear infill

• 0.15mm layer height, dynamically lowered down to 0.1mm towards the top layers

• 8 solid top and bottom layers

• No supports or brim

Scales all the way down to 60% (see photos) but the links will obviously be much weaker. 
The model is split into parts, which makes it possible to e.g. rearrange the build plate and add more segments for a longer centipede. 

PLEASE

Share a photo if you make a crazy or funny print of this model, e.g. extreme scale, funky filament like glow in the dark, etc. Not to dissuade anyone to make and share a print of a completely ordinary giant centipede :)