Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast!

Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :)

Print takes about 3h, but it's worth it! :)

It's crucial that you use my print settings (see 3MF file). Some very small imperfections will appear, but you can just pull them off.

Esp. important settings:

• Print tested for PLA

• Supports: Critial Regions Only

• Elephant foot compensation: 0.23mm

• No Brim

• Baisc Setting: 0,2mm layer height - BUT adaptive layer height needed --> down to 0.08 for top parts

Also check out my Spinning Cube 3D Puzzle: HERE