🚀 Spin'n'Squeeze – The Ultimate Fidget Hybrid

After printing NAM3Designs original "Fidget Squeezer" my kids and I were hooked. It’s a great haptic toy, but one thought kept spinning in my head: "What if this could actually spin?"

So, I redesigned it to give you the best of both worlds!

🔧 Key Improvements:

Integrated Spinner Function: Hold it, squeeze it, and now – spin it! The added hubs transform the squeezer into a high-satisfaction fidget spinner.

Anti-Jam Design: I added a custom spacer pin that snaps into place. This prevents the mechanism from "over-angling" and getting stuck when pushed flat. No more fiddling to get it back into shape!

Print-and-Play: Optimized for PLA. No supports needed.

🖨 Print Settings:

Layer Height: For the best results and the smoothest spinning action, I highly recommend a layer height of 0.12mm. (0.2mm also works, but 0.12mm makes the surfaces much cleaner).

Infill: 15–20% (Grid or Gyroid recommended for stability).

Supports: None.

🛠 Assembly & Parts:

The assembly remains as simple as the original. The new Spinner Hubs and the spacer pin just snap right into place.

What you need:

1x Spin'n'Squeeze Body

1x Spacer Pin

2x Spinner Hubs

1x Durable rubber band (standard size)

Credit to NAM3Designs for the brilliant original concept.