Set of three decorative Easter eggs designed for 3D printing, each featuring a different level of surface detail and cut-through pattern. Perfect for seasonal decorations, table display, or Easter baskets.

Variants:

• Version 1 (solid, 1 mm embossed pattern) – raised surface pattern (~1 mm), no cutouts. Clean and classic look.

• Version 2 (partially hollowed) – partially carved pattern allowing subtle light to pass through.

• Version 3 (fully cut-through / hollow) – pattern goes through the entire wall, creating a lantern-like effect.

⚙ Print Settings (General)

Printer: FDM 
Material: PLA (recommended), PETG optional

Layer height:

• 0.16 mm (recommended for detail)

• 0.12 mm (high detail)

Walls (perimeters):

• 2–3 walls

Top/Bottom:

• 3–4 layers (for solid version)

Infill:

• 0–10% (mostly decorative model)

Supports:

• ✔ Optional for full cut version if bridging issues appear

Seam:

• Back / aligned (to keep front clean)

Speed:

• 40–60 mm/s for best detail

Cooling:

• 100% fan after first layers (PLA)

Notes:

• For Version 3 (full cut) → ensure good bridging performance

• For Version 2 → slightly slower speed improves edge sharpness

• Best visual result with white or pastel filament

• Can be scaled (recommended ≥80% to keep details)