Upgrade version 2.0
- Easy assembly of the crankshaft.
- Integrated stand.
- Turning wheels in stead of cranked handle.
Printing
The crankcase is printed with support.
Print the pistons and piston pins with brim.
I printed with PLA+, layer height 0.16 mm.
Use a filament with strong layer adhesion (metallic or silk not recommended).
Dimensions 70 x 68 x 47 mm.
Weight 0.050 kg.
Assembly
- Build the crankshaft with the connecting rods, applying glue. Keep the crank cheeks aligned.
- Lay the crankcase upside down on the table.
- Click the assembled crankshaft in the crankcase, the connecting rods pointing downwards.
- Mount the 8 pistons to the 8 connecting rods using the 8 piston pins.
- Click the pistons in the cylinders.
Operation
Turn the crankshaft with one of the turning wheels.
V8 Engine Fidget 2.0
by Bootjevaarder · original on Printables ↗
Learning / Engineering
♥ 344⬇ 952🖨 4 prints
Print profiles
Pistons - brim.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Crankshaft.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2 Crankcase-Cylinders - support.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print