A simplified model of SLS in preparation for the first crewed Artemis flight (March Now April 1st 2026).
I made this model so I could visualize/demonstrate the incredible feat of engineering that goes into getting humankind out into space safely.
It's not 100% accurate but is enough for learning.
Some creative liberties were taken to fit the magnets for the given scale.
This model is primarily broken down by the launch stages, but some parts are broken further down to reduce the amount of supports necessary or help for users without multi-material capabilities.
Learn about the mission here: https://www.nasa.gov/mission/artemis-ii/
Assembly:
The final assembled model height is 30cm.
The Launch Abort System (LAS) is broken into 2 parts to make printing easier and can be connected with a cut piece of 1.75mm filament.
The Core Stage is broken up into 2 parts as well and has holes to be connected with 4 pieces of 1.75mm filament.
This model uses 6mm x 2mm (diameter x height) round magnets. [24 to 28 of them. Note: Double or triple up magnets as needed in the Core Stage and Solid Rocket Boosters]
Ensure magnets are the correct orientation before pressing/gluing them in.
Optional: Display your model with the launch tower I designed for it
Updates:
April 18th 2026:
Added splash down accessories
April 5th 2026:
Released optional launch tower display stand
April 3rd 2026:
Created V2 Parts:
Service Module now contains 4 Solar Array Wings instead of 3
Core Stage updated with additional minor details (makes it easier to paint/slice for multi-material)
Independent Left/Right Solid Rocket Boosters with NASA worm logo
SLS Artemis 2 (Magnetic Model)
by TotallyRidiculous · original on Printables ↗
Learning / Physics & Astronomy
♥ 185⬇ 963🖨 4 prints
Print profiles
Launch Vehicle Stage Adapter.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Spacecraft Adapter.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Core Stage (Thrusters).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Solid Rocket Booster.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Interim Cryogenic Propulsion.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Core Stage.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Crew Module.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Launch Abort System pt2.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Launch Abort System pt1.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Service Module.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Service Module V2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Solid Rocket Booster V2 (Left).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Solid Rocket Booster V2 (Right).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Core Stage V2.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Helium Balloons.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stabilizer.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print