Description:

Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle quickly and effectively.

I recommend cleaning the nozzle immediately after finishing work; otherwise, dried glue or silicone will be much harder to remove.

Printing instructions:

• Orientation: upright

• Material: PETG, ABS

• Nozzle: 0.4 mm

• Layer height: 0.2 mm

• Walls: 2

• Infill: 20%

• Supports: no

• Brim: recommended