ℹ Tips for printing:

• Filament: PLA

• Supports: No!

• Layer height: 0.16mm

• Wall loops: 3

• Infill: 15%

• Seam position: back

• Wall generator: -

• Detect thin walls: -

• Brim: No!

• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

• Info‼: Do not scale the Dragon any smaller otherwise the connections will no longer work!

• Info‼: If you apply too much force to the legs they may break because the connections are small!

• Info‼: Please be careful when removing the Dragon from the print bed!

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (4 Color):

• PLA Matte / Orange

• PLA Matte / Red

• PLA Matte / Black

• PLA Matte / White

Or decide for yourself which colors and how many you want to use!

ℹ This model is very filament wasteful please keep that in mind!

------------------------------------------------------

ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)