This project is a fully functional V6 engine model designed for 3D printing. It features:

• Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6,

• Fully printable timing chain,

• Can be rotated manually or powered by a popular DC motor,

🔩 Assembly Details

The model is assembled using:

• Crankshaft and camshafts: 6x bearings 608 (you can print it from included files),

• Oil pan: 8 × M4 × 15 mm + nuts,

• Cylinder heads: 8 × M4 × 15 mm + nuts,

• Timing chain tensioner: 1 × M4 × 25 mm + nut, 608 bearing

• Timing chain guides: 2 × M4 × 8 mm + nuts,

Optional DC motor mount:

• Motor type: standard TT DC gear motor (48:1, 3–6 V, yellow plastic housing – widely available)

• 2 × M2.5 × 25 mm + nuts, or M3 × 25 mm screws (without nuts),

🔩 Printing tips

• Camshafts: print split along the axis and glue after printing,

• Crankshaft: print vertically with supports,

• Springs: print with supports,

• Valves: print horizontally with supports (vertical printing likely to fail),

• Timing chain: print with 0.16 mm layer height. Suggested material PLA

Check out my other engine models!

Update 02.01.2025

• Improved DC motor adapter