For this you need:

Screws 6#32, I recommend to buy long screws and cut them with tweezers or dremel:
- 6 for external shroud (8mm long)
- 4 for motherboard (5mm long)
- 4 for PSU (8mm long)
- 1 for GPU hold (5mm long)
- 2 for USB ports (5mm)
- 2 for front fan panel (5mm)
12 magnets (3x10mm)
PCIe riser cable 180 degrees both connectors and 185-190mm long(could be smaller but i just have a the mentioned), I designed around this https://es.aliexpress.com/item/1005006000973971.html?spm=a2g0o.order_list.order_list_main.5.2bd2194dgvI5wu&gatewayAdapt=glo2esp
USB 3.0 2x cable, the 0.3m is enough. https://es.aliexpress.com/item/33046797763.html?spm=a2g0o.order_list.order_list_main.20.2bd2194dgvI5wu&gatewayAdapt=glo2esp
Power led switch button 60cm cable and 19mm diameter. For better fit, weld some different cables or use a low profile button, just needs to be 19mm diameter. https://es.aliexpress.com/item/1005005585121134.html?spm=a2g0o.order_list.order_list_main.189.2bd2194dgvI5wu&gatewayAdapt=glo2esp
1x 120mm fan, can fit normal 25mm width
CPU cooler up to 30 mm height, ID-cooling IS-30 is what I use.
Flex ATX PSU. I used 400W like this, works really good. https://es.aliexpress.com/item/10000290089636.html?spm=a2g0o.order_list.order_list_main.224.2bd2194dgvI5wu&gatewayAdapt=glo2esp
4 scotch 21mm diameter rubber stops for feet

SFF Mini ITX Steam Machine Case

by 3DCatt · original on Printables ↗

Gadgets / Computers

♥ 183⬇ 1.1k🖨 0 prints

License: Creative Commons — Attribution — Noncommercial ↗steamminiitxsffsffpcminiitxcasesmallformfactorsteammachine

Print profiles

front_panel.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
button_spacer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
usb_holder.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
front_panel_io.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
fan_frame.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
main_frame.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print