This knitted BIC lighter sleeve wraps your everyday lighter in a cosy, winter-ready hug. Soft, sweater-like texture and festive seasonal charm make it feel right at home beside a crackling fire, tucked into a stocking, or carried on snowy evenings. It’s a tiny touch of holiday warmth—practical, charming, and perfectly suited for the holiday season and all things cosy.

Print settings

0.2mm layer height works well with at least 15% Rectilinear infill pattern. 

To avoid internal stringing, set to “Avoid crossing perimeters” and set the seam position to “Aligned”.

If you want more detail, please print with a higher resolution. I printed it with 0.2mm layer hight as shown in the preview.

Remove the part after the print sheet has cooled, then flex the sheet to release it.

Print the sleeve in one color or do a color change each 39th layer if you are using a 0.4mm resolution. 

NOTE: This case is made to fit standard size J6 Bic lighters without additional plastic wraps or shrink coverings.

Important Please Read

Print and use this 3D printed BIC lighter sleeve at your own risk. I assume no liability for any damage, injury, or malfunction arising from its use, misuse, or from the characteristics of the material you choose to print it with.

This case is made to fit standard size J6 Bic lighters without additional plastic wraps or shrink coverings.

Please keep in mind: Different filaments can vary in their physical properties, which affects how they behave during extrusion. This can have an impact on the fit of the BIC sleeve.

Should the cover be too loose, please consider the following options:

• adding some tape around the lighter.

• consider re-scaling the width of the object in your slicer between -0.25 mm and -0.5 mm. 

Should the cover be too tight, please consider the following option:

• You can print this with three perimeters for extra strength, but be aware that the lighter will fit much more tightly. If you choose to do this, proceed at your own risk: gently warm the 3D-printed sleeve with a heat gun and carefully press the lighter into place while the material is slightly pliable.

A hole at the bottom allows for easy removal when it’s time to replace the lighter.

Enjoy!

3D Model Usage Disclaimer

All 3D models provided by me are offered free of charge and are licensed under a Creative Commons license. These models are intended for personal and non-commercial use only. Resale, redistribution for profit, or inclusion in any paid product or service is strictly prohibited.

Any unauthorized commercial use or sale of my models constitutes a violation of the license terms and may result in a formal report, takedown request, and potential legal action. By downloading or using these models, you agree to comply fully with the stated licensing conditions.