K-Pop Demon Hunters – Line Art

Includes a press-fit stand, press it in from the corners. I included 2 stands, one on each corner, but you use only one in the middle!

• Uses about 44g of filament at the default size.
• Can be scaled down to fit an A1 mini or scaled up for larger printers.
• Important: Wait until the print bed is fully cooled before removing the model to avoid breaking it.

TIPS:

• Wash your build plate with hot water and soap.
• Use Arachne Wall Generator to best preserve quality.
• Bump up your bed plate temperature by 5 degrees.
• Use Avoid Crossing Wall setting at 200-300 mm to have less stringing.
• If your have a P1/X1/H2 series printer, consider turning off Aux Fan, otherwise the part the aux fan is on might warp!