If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used.
The model is designed for an inner diameter of the roll of 33 mm.
If, for example, an inner diameter of 40 mm is required, the scaling factor in the slicer is calculated as follows:
x = y = (100 × 40) / 33 = 121%

Side Protection for Electrical Insulating Tape /Seitenschutz für Isolierband

by eof · original on Printables ↗

Hobby & Makers / Tools

♥ 2.8k⬇ 4.9k🖨 66 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗protectiontapetaperollprotectioncapinsulatingisolierbandinsulatingtape

Print profiles

Insulating_Tape_Protection v1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Insulating_Tape_Protection_38_98.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print