ā¹ All my 3mf files are coming with pre painted Supports for the Head!
ā¹ Yes it can stand!
ā¹ Tips for printing:
Filament: PLA
Supports: Yes! Only for the head!!
Layer height: 0.16mm
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: -
Brim: Normally No! But if you have any problems with adherence to the build plate I would recommend a brim!
BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
Infoā¼: Do not scale the Cat any smaller otherwise the connections will no longer work!
Infoā¼: If you apply too much force to the legs they may break because the connections are small!
Infoā¼: Please be careful when removing the Cat from the print bed!
------------------------------------------------------
āā¼Disclaimerā¼ā These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (1 Color):
PLA Matte / Bone White
Articulated Skeleton Cat
by 3DPrintyi Ā· original on Printables ā
Seasonal designs / Autumn & Halloween
ā„ 476ā¬ 2.9kšØ 23 prints
Print profiles
ArticulatedSkeletonCat.stl
ā± time and weight estimated after preparation Ā· 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonCat_PrusaSlicerCoreOne.3mfDEFAULT
ā± time and weight estimated after preparation Ā· 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonCat_PrusaSlicerXL.3mf
ā± time and weight estimated after preparation Ā· 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonCat_BambuStudioH2D.3mf
ā± time and weight estimated after preparation Ā· 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonCat_BambuStudioX1C.3mf
ā± time and weight estimated after preparation Ā· 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonCat_BambuStudioA1.3mf
ā± time and weight estimated after preparation Ā· 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ArticulatedSkeletonCat_BambuStudioA1mini.3mf
ā± time and weight estimated after preparation Ā· 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print