Info

A compact hard drive cage for 3.5" drives that will fit most cases. Can be mounted to 120mm and 140mm fan slots, not single fan mount points. Different models from 1 to 6 drive bays so you can choose which one best fits your needs or upgrade plans. Recommended to install it with rubber washers to reduce the noise from the drives.

Printing

Recommended to print using ABS or another material that can handle some heat.

Print the caddy flat with support for the rails, handle and back edge. You can also use the pre supported file.
Cage can be printed without support in the orientation provided.

Sizes

Footprint:
Body - 117mm (w) x 154mm (d)
Mounting feet - 131,4 mm (w)

Height:
6 Bay - 198mm
5 Bay - 166mm
4 Bay - 134mm
3 Bay - 102mm
2 Bay - 70mm
1 Bay - 38mm

Hardware

4-6x #6-32 screw (for mounting the HDD to the caddy)
1-2x M3 screw (optional for securing the caddy to the cage)
1-2x M3 x 4mm threaded insert (optional for securing the caddy to the cage)
4x M4 x 14mm bolt (for mounting the cage to case)
4x M4 nut
4x Rubber washer (recommended)

HDD Cage | 1 - 6 Bays

by Moonyx · original on Printables ↗

Gadgets / Computers

♥ 1.2k⬇ 3.4k🖨 10 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗hddharddiskharddriveharddrivemounthddcaddyharddrivecage

Print profiles

HDD_Caddy.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD_Cage_3Bay.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD_Cage_5Bay.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD_Cage_4Bay.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD_Cage_1Bay.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD_Cage_6Bay.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD_Cage_2Bay.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD_Caddy_PreSupported.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print