🖨️ Print Shop
Card Holder Wallet

This model is inspired by Wallie(var) - Advanced Lever Action Wallet by SMACKMAX_.

The holes in the back plate are designed for 4mm long M3 heat inserts (5 are needed).

You will need 5x 10mm M3 flat head screws.

No supports needed. Printed in PETG.

Project link

UPDATE (V2)

Version 2 holds 3 or 4 cards in place with side springs. No extra parts are needed, just re-print V2 of the front and back plates. Also (because of the layer lines) the top part of the springs needs to be smoothed out (either sanded or with a sharp knife) to allow the cards to slide in easily.

Card Holder Wallet

by nanselm · original on Printables ↗

Hobby & Makers / Organizers

♥ 1.9k⬇ 3.9k🖨 20 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗walletcardholder

Print profiles

  • frontplate.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • sidepart.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • ejector.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • trigger.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • backplate.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • backplate-v2-with-spring.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • frontplate-v2-with-spring.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print