This is a clip-on poop chute/bucket for the QIDI Q2, designed to collect purge material neatly without any screws or permanent modifications.

UPDATED Small Version (RECOMMENDED PRINT):
Added Chamfers to improve Printability
Added Holes for Ventilation

Features:

No screws required – simple clip-on attachment.

Two sizes included –
• Small body: faster print, compact.
• Large body: holds more purge waste.

Quick print – ~2.5 hrs with standard settings.

Tested & verified – thanks to @caiodelgadonew for measurements,  testing and feedback.

Print Settings (tested):

Layer Height: 0.2 mm

Nozzle Size: 0.4 mm

Material: Tinmorry Clear PETG

Supports: Print Upright, might require supports on the hinge, but personal preference

Print Time: ~2.5 hours

Tips & Notes:

PETG is recommended to reduce purge bits sticking; PLA works but may cause buildup.

Ensure you have clearance under the purge area before attaching.

For longer prints or multi-colour jobs, the larger chute is recommended.

The larger version is currently untested, although features the same clip.