Fun articulated toy - a moving chicken walking along a sloping walkway.
It is a mechanical figure, no electronic device.
The parts fit together tightly, no glue is necessary.
You can use glue on the legs if you want.
When assembling the figure, pay attention to the position of the legs, this is important for the chicken to walk properly.
Important: It is necessary to stick pieces of sandpaper (120 grit) on the underside of the legs to prevent the chicken from slipping.
Print settings
0.2 layer height
2 perimeters
NO SUPPORTS, NO BRIM
Other optional print settings
Chicken:
15 % infill gyroid
Walkway:
4 solid top layers
3 solid bottom layers
15 % infill grid
**********************
Update August 4, 2025:
Added file chicken_leg_larger_hole.stl for better leg movement.
There is a small joint tolerance when printing on some printers.
The gcode files have also been updated.
Walking Chicken
by J. V. · original on Printables ↗
Toys & Games / Other Toys & Games
♥ 1.6k⬇ 4.5k🖨 43 prints
Print profiles
chicken_foot1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_leg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_foot2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_walkway1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_pillar1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_walkway2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_pillar2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_walkway.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_wing2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_wing1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_body.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken_leg_larger_hole.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chicken.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print