Glass mount with hinge for broken or missing metal original bracket.

Can be printed without support if printed the weaker way - Ironically it was designed to be printed the wrong way and now it can be printed that way without support … lol.  

If you decide to print it the stronger way (like in the edit), only support is needed for the hinge cylinder.

***EDIT*** : I just remembered I chose to print the model with the short side on the bed.  In other words, the long side should print in the height of the bed (as it is in the make of the model).  This ensured the print lines is so that the hinge cylinder is stronger.  Due to how the hinge functions if the print lines are anti-parallel to the cylinder length it decreases the strenght under strain, especially with PLA.  This was also confirmed from Douglas.