🖨️ Print Shop
Squirt Chain Lube Applicator

UPDATE 05/08/2025: added a variant for 11/12 speed chains (thanks @GrzegorzZ)

UPDATE 28/07/2025: after further testing and reviews the model geometry was updated to avoid wicking lube to the sides

This is an applicator for Squirt Chain Lube bicycle chain lubricant. It's designed with specially positioned internal channels that deliver the lube precisely where the parts of the chain meet.

There are 2 variants so far:

  • For 6 speeds chain with 7.8 mm outer width 
  • For 11/12 speeds chain with 5.3 mm outer width (SRAM GX 1x12 or Shimano Ultegra)

Not guaranteed to work with other chain sizes. However, if you provide outer and inner width measurements of your chain, I'm willing to create a version for you.

Usage tip: clean the channels after each use (for example, by blowing through them) - otherwise, wax-based lube will harden inside, and you won't be able to use the applicator again.

Squirt Chain Lube Applicator

by Vasilii · original on Printables ↗

Sports & Outdoor / Outdoor Sports

♥ 173⬇ 530🖨 7 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗chainlubebicycleshimanosramapplicatorbicycletoolslubricantbicyclechainbicycletoolsquirtultegrachainlubricantsramgxchainlubeshimanoultegra

Print profiles

  • squirt_chain_lube_applicator_6speed.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print
  • squirt_chain_lube_applicator_11-12speed.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print